The precise work of the dual station of the four process woodworking engraving machine cutting machine is inseparable from the cooperation of various components. Next, Johnson CNC will popularize the three important factors of the use method and speed debugging of the tool setting instrument of the four process woodworking engraving machine cutting machine dual station engraving machine, so that you can better understand our products from the operation principle.

速度限制是將三軸的運動高速度加以規定。此功能在于確定雕刻機三軸在正負方向的速度范圍。如果用戶規定了高的速度限制，在執行文件加工和手動運動時，如果用戶設定的速度超過了此限制，系統將以限制為高速度。按確定進入設置，按上和下鍵選擇X,Y,Z三軸設置。按確定進入設置，全星號表示速度不作限制，如需要修改在光標處直接輸入數值，按確定鍵確認更改，光標自動下移一行，正負方向設置完后退回上級菜單。如果不做更改，按停止鍵直退回上級菜單。

The speed limit specifies the high speed of the three-axis movement. This function is to determine the speed range of the three axes of the engraving machine in the positive and negative directions. If the user specifies a high speed limit, when executing file processing and manual movement, if the speed set by the user exceeds this limit, the system will limit it to high speed. Press OK to enter the setting, and press the up and down keys to select the X, y and Z axis setting. Press OK to enter the setting. The full asterisk indicates that the speed is not limited. If it needs to be modified, directly enter the value at the cursor, press OK to confirm the change, the cursor will automatically move down one line, and return to the superior menu after setting the positive and negative directions. If you do not make changes, press the stop key until you return to the previous menu.

對刀儀的使用大大的方便用戶確定Z軸的工作零點位置，當?shù)窨虣C(jī)對刀完成后，系統將當前Z軸位置確認為Z軸工作坐標系零點，所以用戶必 須將對刀儀塊的厚度輸入到參數中，在執行文件時系統自動將零點位置下移對刀儀塊厚度的深度，這樣才真 正確定了Z軸工作零點。

The use of the tool setting instrument greatly facilitates the user to determine the working zero position of the z-axis. After the tool setting of the engraving machine is completed, the system confirms the current z-axis position as the zero point of the z-axis working coordinate system, so the user must input the thickness of the tool setting instrument block into the parameters. When executing the file, the system automatically moves the zero position down to the depth of the thickness of the tool setting instrument block, In this way, the z-axis working zero point is really determined.

雕刻機必 須先有接口板同床體和對刀儀塊的物理連接，對刀功能才能實現。雕刻機對刀操作使用的是組合鍵：菜單+觸停，操作方法是：先按菜單不放手再按觸停，然后同時松開，Z軸開始緩慢下降當?shù)都饨佑|到對刀儀塊時，Z軸停止下降開始快速上升。

The engraving machine must have the physical connection between the interface board, the bed body and the tool setting instrument block before the tool setting function can be realized. The tool setting operation of the engraving machine uses the combination key: menu + Touch stop. The operation method is: first press the menu without letting go, then press touch stop, and then release it at the same time. The Z axis starts to decline slowly. When the tool tip contacts the tool setting instrument block, the Z axis stops falling and starts to rise rapidly.