1. To understand the performance and function of the stone engraving machine motor, the engraving head motor of the engraving machine is also very key, because the engraving head motor generally does not belong to the warranty scope, and the engraving head motor works continuously for a long time, so if the engraving head motor is not good, it will also affect the use of the engraving machine.

2、要注意石材雕刻機的功能，雕刻機的雕刻電機有大功率和小功率之分。有些雕刻機功率較小只適合做雙色板、建筑模型、小型標牌、三維工藝品等材料的加工，這種工藝已流行一段時間，但由于雕刻功率太小而大大影響了其應用范圍。另一種是大功率雕刻頭的雕刻機，這種雕刻機有分為兩類，一類是大幅面切割機：幅面一般在一米以上，但這種雕刻機的精度一般較差;另一類是幅面適中的雕刻機：這種雕刻機一般應用于精細加工和有機標牌制作。

2. Pay attention to the function of stone engraving machine. The engraving motor of engraving machine can be divided into high power and low power. Some engraving machines have low power and are only suitable for the processing of materials such as two-color plates, building models, small signs and three-dimensional handicrafts. This process has been popular for some time, but its application range has been greatly affected due to the low engraving power. The other is the engraving machine with high-power engraving head. This engraving machine is divided into two categories. One is the large format cutting machine: the format is generally more than one meter, but the accuracy of this engraving machine is generally poor; The other is the engraving machine with moderate format: This engraving machine is generally used for fine processing and organic sign making.

石材雕刻機

Stone carving machine

3、再者就是雕刻頭電機的速度可調范圍，一般速度可調范圍是每分鐘幾千到三萬轉，若速度不可調或速度可調范圍較小，那么就說明該雕刻機應用范圍就受到很大的限制，因為雕刻不同的材料一定用不同的雕刻頭轉速。

3. Moreover, the speed adjustable range of the engraving head motor is generally thousands to 30000 revolutions per minute. If the speed is not adjustable or the speed adjustable range is small, it shows that the application range of the engraving machine is greatly limited, because different engraving materials must use different engraving head speeds.

4、雕刻機本體制造工藝：大功率雕刻機工作時要求本體一定要精 密和穩定，所以，長期大功率雕刻應采用鑄造本體才能保證其加工精度和穩定性。

4. Engraving machine body manufacturing process: the body of high-power engraving machine must be precise and stable when working. Therefore, the casting body should be used for long-term high-power engraving to ensure its processing accuracy and stability.

5、控制器一般也分為兩類：一類控制器只是做驅動，而其所有運算工作由電腦來完成，在雕刻機工作時電腦處于等待狀態，無法進行排版工作。另一類控制器采用單板機或單片機控制，這種控制器實際上就是一臺電腦，所以只要雕刻機一開始工作，電腦馬上就可以進行其他排版工作，特別是較長時間雕刻時，該優勢特別明顯。

5. Controllers are generally divided into two categories: one type of controller is only for driving, and all its operations are completed by the computer. When the engraving machine is working, the computer is in a waiting state and cannot carry out typesetting. Another kind of controller is controlled by single board computer or single chip microcomputer. This controller is actually a computer. Therefore, as long as the engraving machine starts to work, the computer can immediately carry out other typesetting work, especially when engraving for a long time.

6、絲桿和導軌也是石材雕刻機的重要組成部分，好的絲桿和導軌是雕刻機長期使用時其精度和性能的保證。

6. The screw rod and guide rail are also important components of the stone carving machine. Good screw rod and guide rail are the guarantee of its accuracy and performance when the carving machine is used for a long time.