導致雕刻機主軸損壞的4種原因？

來源：http://m.hbwudeli.com.cn 時間：2021-03-06 

雕刻機主軸是雕刻機開機必運行的一個主要配件，也是不可或缺的重要配件之一。雕刻機主軸在使用過程中容易損壞，產生故障的原因有很多，

Engraving machine spindle is a main accessory of engraving machine, and it is also one of the indispensable important accessories. The main shaft of engraving machine is easy to be damaged in the process of use. There are many reasons for failure,

今天我們主要來說說以下4個原因。

Today we mainly talk about the following four reasons.

1、雕刻機主軸的質量問題。   也就是說主軸本身質量不過關導致了軸承的損壞。用的是質量很差的軸承，在雕刻機主軸高速運轉的時候壽命變短，容易損壞也就容易解釋了。

1. Quality problem of engraving machine spindle. That is to say, the quality of the spindle itself is not up to standard, leading to the damage of the bearing. The bearing is of poor quality. When the engraving machine spindle is running at high speed, its service life becomes shorter and it is easy to be damaged.

2、雕刻主軸冷卻系統沒有效果。   雕刻機主軸水冷的都有水循環系統，如果長期水循環不好，或者忘了開水循環，時間一長，就會出現熱漲效應，導致摩擦增大，造成了軸承的損壞。

2. Engraving spindle cooling system has no effect. Engraving machine spindle water cooling has water circulation system, if the long-term water circulation is not good, or forget the boiling water circulation, a long time, there will be thermal expansion effect, resulting in increased friction, resulting in the damage of the bearing.

3、和雕刻機具體操作有關系。   有的主軸轉速還沒有達到就開始雕刻，容易造成軸承的損壞，有的客戶在雕刻的時候雕刻材料阻力大小不一樣，沒有及時調整速度，損壞了雕刻機主軸。

3. It has something to do with the specific operation of engraving machine. Some of the spindle speed has not reached the start of carving, easy to cause damage to the bearing, some customers in carving carving material resistance size is not the same, did not adjust the speed in time, finally damaged the carving machine spindle.

4、水冷主軸未做好防凍措施。   冬天一定要注意這點，水在寒冬凍結導致管道破裂的事情屢見不鮮，雕刻機主軸也是會被凍傷的。

4. Antifreezing measures were not taken for water-cooled spindle. We must pay attention to this point in winter. It is not uncommon for water to freeze in winter, which leads to pipe rupture. The main shaft of engraving machine will also be frostbitten.

注意事項： 主軸注意防凍、 定期檢查水循環冷卻裝置.

Precautions: pay attention to antifreeze spindle, regularly check the water circulation cooling device

• 上一篇：介紹五個要點助你選購木工雕刻機
• 下一篇：泡沫雕刻機的鑄造工藝特點

相關產品：
• 
  木工雕刻機
• 
  1325木工雕刻機獨...
• 
  1325木工雕刻機
• 
  1325木工鏤空花格...
• 
  1225型平雕圓雕一...

相關新聞：
• 
  激光雕刻機和機械雕刻...
• 
  三軸雕刻機無心外圓磨...
• 
  石材雕刻機斷刀的原...
• 
  數控開料機會受到什么...
• 
  泡沫雕刻機日常井蓋如...