Also known as the "Dragon carving machine" or "foam carving machine", as the foam plastic mold is used more and more widely, the demand for the CNC machine tool polystyrofoam machining center that can make the Dragon model is bigger and bigger. The conventional styrofoam engraving machines have models of 1322040, 2540, etc. due to the large overall size of the polylon machining center, high precision requirements, and great technical difficulties, there are few enterprises with the production capacity of styrofoam machining center.

一，我們要了解保麗龍加工主軸的性能和功能，雕刻機的主軸電機也是很關鍵的，因為雕刻主軸電機是長時間連續工作的，所以如果雕刻主軸電機不好會很影響雕刻機的使用，比如電腦雕刻機的使用。保麗龍雕刻機功率更小也要是7.5KW的。

1、 We need to understand the performance and function of the spindle of the styrofoam machining center. The spindle motor of the engraving machine is also very important. Because the carving spindle motor works continuously for a long time, if the engraving spindle motor is not good, it will affect the use of engraving machine, such as the use of computer engraving machine. Baolilong engraving machine power minimum also if 7.5kW.

二，就是雕刻主軸電機的速度可調范圍，一般速度可調范圍是每分鐘幾千到三萬轉，若速度不可調或速度可調范圍較小，那么就說明該保麗龍雕刻機應用范圍就受到很大的限制，因為雕刻不同的材料必須用不同的雕刻主軸轉速。

2、 It is the speed adjustable range of engraving spindle motor. Generally, the speed adjustable range is thousands to 30000 revolutions per minute. If the speed is not adjustable or the speed adjustable range is small, then it means that the application range of the styrofoam engraving machine is greatly limited, because different materials for carving must use different carving spindle speed.

三，控制器一般也分為兩類:一類控制器只是做驅動，而其所有運算工作由電腦來完成，在雕刻機工作時電腦處于等待狀態，無法進行排版工作。另一類控制器采用單板機或單片機控制，這種控制器實際上就是一臺電腦，所以只要保麗龍雕刻機一開始工作，電腦馬上就可以進行其他排版工作，特別是較長時間雕刻時，該優勢特別明顯。

3、 The controller is generally divided into two types: one is only used for driving, and all the calculation work is completed by the computer. When the engraving machine is working, the computer is in a waiting state and cannot carry out typesetting. The other kind of controller is controlled by single board computer or single chip microcomputer. This kind of controller is actually a computer, so as long as the styrofoam carving machine starts to work, the computer can immediately carry out other typesetting work, especially when carving for a long time, this advantage is particularly obvious.

四，雕銑機床體制造工藝:大功率保麗龍雕刻機工作時要求床體一定要精密和穩定，所以，長期大功率雕刻應采用鑄造本體才能保證其加工精度和穩定性。絲桿和導軌也是雕刻機的重要組成部分，好的絲桿和導軌是雕刻機長期使用時其精度和性能的保證。

4、 Engraving and milling machine body manufacturing process: the high-power Baolilong engraving machine must be precise and stable when it works. Therefore, the casting body should be used for long-term high-power engraving to ensure its machining accuracy and stability. The screw rod and guide rail are also important parts of engraving machine. Good screw rod and guide rail guarantee the accuracy and performance of engraving machine when it is used for a long time.

總而言之，保麗龍雕刻機與普通的木工雕刻機不同，不僅僅體現在配置方面。如果大家有機會，可以到工廠實地考察一下生產廠家生產加工實力以及配件使用情況。另外，有需要鑄造木工雕刻機的朋友也可以聯系哦。

In a word, styrofoam carving machine is different from ordinary woodworking carving machine, not only in terms of configuration. If you have the opportunity, you can go to the factory to investigate the production and processing strength of the manufacturer and the use of accessories. In addition, the need to cast wood carving machine friends can also contact oh.